Guild 1/3 Sheet Sander - 200W451/8309
Tell us where you are to check stock:
About this product
This Finishing Sander has 200watt power output, ideal for preparing wooden doors and windows prior to painting or fine sanding of flat surfaces such as interior walls before painting. The handy dust box collects any debris, allowing you to get the job done quickly and efficiently with minimal mess. Features include a soft grip handle and lock-on button for convenience and additional comfort in prolonged use, durable plastic base, dual sanding sheet fitment system, (spring clip or hook and loop). Compatible with all 90 x 187mm sanding sheets.
Guild power tools are built to last and come with a 2 year guarantee. So whether you are using a drill to put up a shelf or using a mitre saw to cut decking, you know with guild power tools the products are built to last. Guild - for a job well done.
- Pad sander.
- 200 watts.
- Soft grip handle.
- Front handle.
- Rear handle.
- Accessories included: 1 dust box. 1 vacuum adaptor. Sanding paper.
- Size H16.3, W9.1, D30.1cm.
- Sander weight 1.6kg.
- Cable length of 2.5m.
- Hook and loop fastening system.
- Dust extraction.
- Manufacturer's 2 year guarantee excludes professional use.
- EAN: 5053721919255.
90% would recommend to a friend
Perfect gift for my husband to the wrinkles out of his winkle glad you get 4 sandpaper because it took the lot to get it out it.
Very Good Value
This is another of the Guild products i have bought . Yet again it is well built ,works well and is great value for money . Its ideal for the occasional DIY person ,i also have the Guild Jig Saw and Hammer Drill and have had no problems with any of them .
Basic sander; does the job
Basic sander, does the job. Simple on/off function.
Fit the sanding paper over the base. Make sure the sanding paper is even with the
edges and that the dust collection holes in the base and sanding paper is aligned and
that the sanding paper is taut on the base.
Lift the sanding paper retaining clips to the open position and insert one end of the
sanding paper under the retaining clip.
Push the clip back into the retaining position. Lightly stretch the paper over the base
plate ensuring that it is not folded or wrinkled then position under the other retaining
clip back into the retaining position. Check that the paper is flat to the base plate,
if not, release either clip and reposition the paper before resetting the clip. Switch
on momentarily to check that the sander is functioning correctly. If there is undue
vibration, repeat the paper positioning procedure.
For full instructions see;
Thank you for using Argos Q&A,
8 October 2019
unhook one spring from the side and it pivots down; place sheet on bottom and swing the spring back into position. The loop of the spring will hold one end of the sheet in place. Repeat for the other side/end making sure the sheet is flat/held tight. I found that I could get the sheet marginally tighter if I fitted the rear of the sheet first. Happy sanding!
7 October 2019
I would advise you to have a look at the user instructions for this Guild 1/3 Sheet Sander - 200W in the following link which may be of assistance to you:-
Thank you for using Argos Q&A.
28 March 2019
The small print
*Prices correct as displayed but are subject to change.
The customer and brand answers you’ll see above are submitted independently. As we don’t review these answers, we can’t take responsibility for anything they may say. The responses from Argos colleagues are accurate at the time of publishing. For the latest info, you should check the product page.
This product comes with a minimum one year manufacturer’s guarantee, unless otherwise stated in the specification above.