Einhell 2000W 2-in-1 Table Circular Saw - 230V

Like the bench, but not too keen on the angle guid

The bench is fine, the angle guide is held to the table by a plastic fixture that's not too good. The bench came with pictire guides to build it these were OK but care needd, a few words would have made building it easier. The blade is super sharp and the dust extractor system is OK if using a decent vacuum. This is a good entry level saw, worth the price, with some good features

Egg, 55 - 64, Morecambe

Great saw for the money and nice finish to cuts.

Bought this to do the new flooring in my boat, it’s cut through the 18mm ply with ease and left a nice smooth finish to the cuts rather than ripping through them. Found it easy to set up in no time and although I’ve had to move the measurement gauge slightly for the cuts to be accurate it only took a few minutes. Quite a kick when it starts but on slowing down it’s a lot better and more user friendly . Overall I’m very happy with it .

Coops, 45 - 54, Rotherham

Assembly instructions could be better

This is my first table saw, and I was surprised by the build quality. It's a big beast, even though the main red base is a type of thermoplastic, the bed is metal. The assembly instructions are in picture form, I did find it useful to print out the exploded view .pdf from the manufacturer's website. Parts 30, and 31, cross braces are mark, "B," and, "C," but no indication which is which number. I did change the blade for one that will cut plastic, be careful not to drop the two washers or Bolt into the dust extraction housing. A long screwdriver with a double sided sticky pad retrieved them. Zero instructions on how to balance the new blade, there is a 2-3mm variance to the side from the vertical. Not applied power yet due to the blade problem. I am waiting for the manufacturer's customer care to get back to me.

Graham, 65 or over, South Yorkshire

Table Saw

Assembly was straightforward, and the table feels sturdy and secure when erected. Cuts well, with no vibration, though is a little noisy and dust extraction is poor. More dust on the floor than collected!

null, 65 or over, Lancashire

worth the wait

wanted onefor some time but did not have the room to keep it new shed and new saw worked well instructions not very good but easy enough to work out where everything fits good clean cuts and with a 3 inch cut it does what i want out of it

old woodcutter, 65 or over, wales

Good value saw, make the mitre slots standard

Overall for the price it's a good bit of kit. My only criticism is that the mitre slots are only 15mm and not standard size of 19mm so you are unable to upgrade the mitre guage to an after market one without modifying / replacing the bar it sits on. Other than that, out of the box cuts straight(I have upgraded the blade to a higher tooth one). Will hold 90°/ 45° for multiple cuts, easy to adjust multifunctional dial for height and cutting angle.

Casey, 45 - 54, Lancashire

Einhell table saw

The saw was easily assembled, but the instructions for calibrating the saw are poor. Have made some test cuts and happy enough with the saw.

Worker, 65 or over

Not perfect but pretty good.

Arrived well packaged. Not too difficult to assemble. It is very loud, and I suspect neighbours would complain if I used the saw regularly. The clear guard over the blade is a nuisance. I presume it should stay up when lifted but it doesn't, so unable to see any markings on the wood.

Jelly08

Great starter saw

Bought this a few weeks ago good saw easy to set up bar that go between legs only two of the four would fit but dose not affect saw from what I can tell, easy to move when assembled as I have to move it when a using it as I don’t have much room to work. Only bad thing could bet blade to cut straight to start with as a washer was put on wrong stopping it from getting to the 90 degree of full 45 easy fix would recommend as a first saw to others

Joemagic8, 35 - 44

Good starting point with 2 draw backs

I have been using this for about 6 months for all types of woods both soft and hard. The saw has never struggled to cut what ever I have asked it to. I have found 2, maybe 3, draw backs. 1. The accessory slots that you would slide the mitre gauge in or a cross cut sled are NOT a standard size so most aftermarket accessories are no good. 2. The fence has some play in it as it is only fixed at one end which makes cutting anything Square really difficult. 🤔 Apart from these 2 issues I have no complaints especially as it was well priced. I am just starting out with woodwork without a huge buget and suspect many people who opt for this saw will be in the same boat but I have found the 2 issues have made it more difficult than if they were resolved. Generally I like einhell tools and have a few others so I won't say don't buy it but it might make your life a bit easier if you bought a saw that had better solutions for the points above.

The Rew, 45 - 54, Lincoln