Hyundai 680W Electric Hedge Trimmer - 61cm

The awkward part of hedge trimming is not always the cut - it is keeping a comfortable grip as you move from upright sides to flat tops and angled faces. The Hyundai HYHT680E combines a 680W corded motor with a 5-position handle that rotates through 180 degrees, up to 90 degrees either side of centre, to allow a comfortable grip for any cutting angle. Its 24" / 61cm blade, 24mm cutting capacity and 10m cable make it a practical choice for routine hedge and shrub maintenance in small to medium-sized gardens - with no fuel to manage and no battery to recharge.

Key Benefits
Keep a Comfortable Grip as the Angle Changes
Turn the rear handle across five positions through 180 degrees, up to 90 degrees either side of centre. That makes it easier to keep both hands in a natural working position while shaping hedge sides, tops and angled faces.

Move Through Routine Hedge Work with Confidence
The 680W motor drives the 24" / 61cm blade at 1500rpm, while the 24mm cutting capacity is suited to regular hedge growth and established shrubs. Use a suitable hand pruner or pruning saw for thicker stems.

Keep Working Without Waiting for a Battery
Mains power gives continuous cutting while the tool is connected, so there is no charging cycle to plan around. The 10m / 32.8ft cable provides useful reach around small to medium-sized gardens.

Stay in Control from Start to Finish
A two-handed safety switch helps keep both hands on the tool during operation, while the front safety guard, cable holder and supplied blade cover support safer use, cable management and storage.

Who Is This For?
Home users maintaining small to medium-sized gardens with a suitable outdoor mains supply.
Gardeners shaping medium hedges, shrubs and boundary growth with stems up to 24mm.
Anyone who prefers continuous corded power without managing fuel or waiting for batteries to charge.
Users who want an adjustable grip for switching between hedge sides, tops and angled faces.

Always read the user manual before use and always follow the safety instructions. Operators must always wear appropriate Personal Protective Equipment (PPE)—including safety glasses with side shields, hearing protection, protective non-conductive gloves, heavy-duty anti-slip footwear, and long trousers—while keeping children, pets, and bystanders at a safe distance of at least 15 meters. For electrical safety, ensure the mains power matches the machine's requirements, use an outdoor-rated extension cord routed safely away from the cutting blade, connect via a Residual Current Device (RCD) not exceeding 30mA, and never operate the tool in rain, wet conditions, or with damaged cables. Always ensure the transparent safety guard is properly attached with screws before use, hold the trimmer firmly with both hands using the two-handed safety switch, and refrain from forcing the tool or cutting branches exceeding its capacity. Never touch the reciprocating blades or attempt to adjust the 5-position rotatable handle while the trigger is pressed, and always disconnect the mains plug before clearing jams, performing maintenance, or storing the machine with its blade cover fitted.
Genpower Ltd, Isaac Way, London Road, Pembroke Dock, Pembrokeshire, SA72 4RW