Sekonda Mens Stainless Steel Blue Sunray Dial Bracelet Watch

Hello Nic,

To change the 24-hour clock and day of the week on your Sekonda 1756.27 Men's Stainless Steel Multifunction Bracelet Watch, follow these general step:

To Set the Time (Including 24-Hour Format)
1. Pull the crown out to the second click (position 3).
2. Rotate the crown to move the hour and minute hands.
- The 24-hour subdial will automatically adjust as you move the main hour hand.
- Keep turning until the correct AM/PM time is reflected on the 24-hour subdial.
3. Push the crown back in when done.

To Set the Day and Date
1. Pull the crown to the first click (position 2).
2. Rotate the crown clockwise to change the date.
3. Rotate the crown counterclockwise to change the day of the week.
- Some models show the day in two languages (e.g., English and Spanish). Keep turning to select the correct one.
4. Push the crown back in to position 1.

Important note: Avoid changing the day/date between 9 PM and 3 AM, as this can damage the movement.

Thank you for using Q&A

Hello Hannah,

The supplier has advised the following for the Sekonda Men's Stainless Steel Multifunction Bracelet Watch:

"As additional links can be added to the bracelet, there is no maximum length. The basic length is 160mm to 210mm."

Thank you for using Q&A.

Hello Mo. The Sekonda Men's Stainless Steel Multifunction Bracelet Watch weighs approximately 131grams.

Thanks for using Q&A.

Hello Jon,

After checking with our supplier, they have advised for the Sekonda Men's Stainless Steel Multifunction Bracelet Watch: ''The watch takes a button cell 371 battery.''

Thank you for using Q & A.

Hi John,

The back of the Sekonda Men's Stainless Steel Multifunction Bracelet Watch, is a push fit, if you take it to a watch repair shop or a jeweller. They have the correct tool to do it.

Hope this helps
Thanks for using Q&A

Hello john,

I can advise the following for the Sekonda Men's Stainless Steel Bracelet Watch:

These are, left to right, Day of the week, 24 hours and date.

Thanks for using Q&A.

Hi Aplomb

The supplier has stated that the length of the bracelet is variable in that links can be added or removed at no extra cost by sending the watch to their Service Dept along with a measurement guide.

Hope this helps. Thanks for using Q&A.

Hello,

Our supplier has advised that the measurements for the Sekonda Men's Stainless Steel Bracelet Watch are -
Depth of the case 11mm
Case width 42mm including crown
Width of the strap 21mm
Length of the bracelet is variable
It would be personal opinion as to whether it would look too large.

I hope this helps
Thanks for using Q&A

Hi Anon,

You will need to contact Sekonda directly by calling 0116 288 2500 and they can advise you further.

Please be advised that the guarantee does not cover:
1. Batteries, straps and bracelets.
2. Damage caused by accident, misuse or lack of care.
3. Water penetration except in watches marked as “Water Resistant”

Thanks for using Q&A,

Just purchased this watch, same type of clasp as my previous Sekonda watch.
I can advise that there is 6 adjustment holes in the clasp. By pressing in the hole and releasing the spring loaded strap bar the strap can be made smaller. I used a safety pin for this.

Hello there,

I have spoken to our supplier who have advised as follows.
Yes, we (Sekonda) do remove links from bracelets if the watch is too big.
The customer would have to send it in with a measurement guide for us to adjust it.

I hope this helps.

Thank you for using Q&A.