AEG OT5OR141DW Under Counter Fridge - White

AEG and Bosch are two separate manufacturers.

AEG builds its own appliances, and is part of the Electrolux Group whose HQ is in Sweden. We have factories around the globe manufacturing our products. So this fridge may contain components from several countries.

Door Hinge Position: Right & Reversible

Unfortunately we do not offer door reversal. You could speak to the delivery team directly and request this.

Yes, you do need to leave space around the OT5OR141DW fridge when fitting it under a countertop between cupboards. Proper clearance is essential for:

Airflow and efficiency: Ensures the fridge can cool effectively without overworking the compressor.

Heat dissipation: Prevents overheating by allowing heat from the condenser to escape.
Maintenance access: Makes it easier to clean and service the appliance.
Recommended Clearance Guidelines (based on general manufacturer advice):

Top clearance: At least 1 inch (2.5 cm).
Side clearance: Minimum of ½ inch (1.25 cm) on each side.
Back clearance: At least 1 to 2 inches (2.5 to 5 cm).
Front clearance: Leave enough space for the door to open fully and for ventilation—typically 1 inch is sufficient.

These clearances help maintain energy efficiency and prolong the fridge’s lifespan. If you're installing it flush between cupboards, make sure these gaps are respected even if they’re not immediately visible.

AEG's standard installation service typically does not include electrical modifications, such as converting a fused spur to a plug socket. However, since your old fridge is connected via a fused connection unit (FCU) rather than a standard 3-pin plug, here's what you need to know:

🔌 Electrical Connection Requirements
AEG appliances like the OT5OR141DW can be connected via a fused spur, which is compliant with UK electrical regulations.
The key requirement is that the connection must be accessible and switchable, allowing the appliance to be isolated quickly in case of emergency.

🛠 Installation Service Considerations
If you're purchasing through a retailer (e.g., AO, Currys, John Lewis), their standard installation service usually expects a 3-pin plug.
If your fridge is hardwired via a fused spur, you may need:
A qualified electrician to install a socket if required.
Or confirm with the retailer whether they accept fused spur connections for installation.

✅ What You Can Do
Check with the retailer where you're buying the fridge to confirm their installation policy for fused spur setups.
If needed, book a qualified electrician to either:
Install a socket outlet.
Or ensure the fused spur meets accessibility and safety standards.