Ecobase Fastfit Plastic Base Kit Shed 6x6ft

Hi Snowdrop,

Ecobase Fastfit Plastic Base Kit Shed 6x6ft 220/8697
These are the plastic base kits for sheds.
Please refer to the instructions for you metal shed regarding anchoring it to a metal base.

Thank you for using Q&A

Hello Chris,

I can advise the following for the Ecobase Fastfit Plastic Base Kit Shed 6x6ft:

This has 16 panels.

Thanks for using Q & A.

Hello there,

The supplier has advised the following for the Ecobase Fastfit Plastic Kit Shed - 5x5, 6x6, and 6x5ft:

"Ecobase Shed Base Kits can be used to support sheds made from wood, metal or plastic. If the shed manufacturer recommends that the building is anchored down, Ecobase can still be used as a base and does not need filling with gravel or concrete. Instead source some 300 to 450mm long tent or marquee pegs ( readily available on line). These can be pushed through holes in the frame of the shed at the bottom of the walls, through the cavities of the Ecobase below and then hammered into the ground beneath. Such an arrangement should keep the building firmly on the ground."

(We'd also advise that you also check with the metal shed's manufacturer for its suitability for use with this type of base before considering purchase).

Thank you for using Q&A.

Hi Tiggy,

The Ecobase Fastfit Plastic Kit Shed has the following base measurement W6.57, D6.57ft. It will be large enough to hold a 6 x 4 shed but there will be a significant amount of base left on the edges.

Thank you for using Q&A.

Hi Ollie,

Thanks for your query about the Ecobase Fastfit Plastic Kit Shed - 5x5, 6x6, and 6x5ft.

Having checked, yes it is possible to join more up together as they all come with the same design of two sides with the notches and two with the "hooks" on. However, the size of the membrane underneath it would limit the overall size that you could build them up to. This won't have a 10ft x 10ft membrane.

Thanks for using Q&A.