Argos Home Proje Round LED Illuminated Bathroom Mirror819/5371
- **Original Price £50.00
Tell us where you are to check stock:
About this product
Put yourself in the best light with this round illuminated bathroom mirror. LEDs are dotted around the outside to give an even spread of light that's perfect for make-up, shaving or just general making yourself beautiful. It's battery powered so there's no fiddly wiring and it's switched on by a simple pull cord.
- Size H40, W40, D3.5cm.
- Diameter 40cm.
- (Integrated LED).
- IP rating 44.
- No wiring required.
- EAN: 5014838759165.
94% would recommend to a friend
Mirror looks lovely in my bathroom
Lovely mirror but didn't realise that it takes eight batteries.
Love it !
Great mirror especially the fact I purchased it in the sale. A little smaller than I expected but looks fab when lit up and so easy to put up as its battery operated in wiring.
Purchased this to re-vamp a tired bathroom. Looks good and more expensive than price paid. I like to leave a light on when guests in house and this illuminates the room with a soft glow.
I can see from reviews left by our customers they are very positive about this product - specific mention is made about how useful this is for when applying make up
Thanks for using Argos Q & A
20 November 2019
Full User Instructions are provided with this Argos Home Proje Round LED Illuminated Bathroom Mirror.
FITTING/REPLACING THE BATTERIES:
Please refer to Assembly Diagrams on back page.
• Make sure you have a cross head screwdriver to hand.
• This product requires 8x 1.5V AA batteries
• Read and follow the battery care warnings listed above
• The performance of the product will depend on the quality and type of batteries used. Always use
good quality batteries.
Please note: The installation of this product will be much easier with the help of an assistant
Remove the back plate (A) by loosening the screws (B) and washers (C) to reveal the battery case. Keep
screws and washers safe for refitting later. Unclip the battery case cover (D) and set aside for refitting later.
Refer to Assembly Diagram 1.
Insert the batteries, observing the correct polarity. Refer to Assembly Diagram 2.
Refit the battery case cover (D). Then refit the back plate (A) using the screws (B) and washers (C) set
aside earlier. Switch mirror on to test using the pull switch (E) Refer to Assembly Diagrams 3 & 6
This mirror fixes to the wall by locating the keyhole shaped slots over the mounting screws in the
wall. It is important to get the screw positions correct to ensure easy and secure fitting. Measure
the distance between the hole centres on the fixing lugs. The distance between the screw fixings is
270mm. Mark the positions of the screw holes on the wall. Check for concealed pipes and wiring
before drilling. Use suitable drill bits for masonry and ceramic tiles. Refer to Assembly Diagram 4..
Supplied wall plugs are for solid walls only. For all other wall types ensure correct fixings are used. Fit
appropriate wall fixings and fit supplied screws. Screw heads must protrude approx 3-5mm from the wall
to enable lugs to fit over adequately. Refer to Assembly Diagrams 4 & 5.
Fit mirror onto screw heads - check the screw heads are securely located into the keyhole slots.
Refer to Assembly Diagram 5.
Switch mirror on using the pull switch (E). Refer to Assembly Diagram 6.
Thank you for using Argos Q&A.
26 May 2019
The small print
*Prices correct as displayed but are subject to change.
**Intervening prices may have been charged, original price is the original price charged online or the printed catalogue price from the last full Argos catalogue in which the product featured.
The customer and brand answers you’ll see above are submitted independently. As we don’t review these answers, we can’t take responsibility for anything they may say. The responses from Argos colleagues are accurate at the time of publishing. For the latest info, you should check the product page.