Argos Home Sophia LED Beaded Ceiling Light - Chrome115/4955
Tell us where you are to check stock:
The instructions for fitting are as follows:
1. Using the ceiling can as a template mark
three holes on the ceiling, using a drill, drill
the holes previously marked and insert the
2. Use the 3 fixing screws provided to secure
the ceiling can to the ceiling joist.
3. Connect the supply wires to the terminal
block, opposite the corresponding wires from
the fitting . (Ensure that connections
are tight and no loose strands of wire are left
out of the connector block).
4. Screw the 3 decorative nuts to secure the
face plate to the ceiling can.
5. Attach the 19 glass crystals to the drops as
6. Insert bulbs (not supplied) into the lamp
holders. (Wattage & bulb type stated on the
How long it will take will depend upon the person who is doing it, but this one will require some patience.
Thanks for using Argos Q&A
13 September 2019
The small print
All light fittings must be fitted in accordance with wiring regulations from the Institute of Electrical Engineers (IEE) and current building regulations. We recommend you employ a qualified electrician and that manufacturer's fitting instructions are followed.
*Prices correct as displayed but are subject to change.
The customer and brand answers you’ll see above are submitted independently. As we don’t review these answers, we can’t take responsibility for anything they may say. The responses from Argos colleagues are accurate at the time of publishing. For the latest info, you should check the product page.