• 1
  • 2
  • 3
  • 4

Choose your wardrobes

Once you’ve measured up and decided where your furniture is going, you can choose and order your new bedroom in 5 easy steps.

Step 1 - Choose your wardrobe frame

There are 3 different wardrobe frame sizes: single, double and corner units. You can also add a combi converter unit to a single or double wardrobe. This useful converter allows you to turn the lower half of your wardrobe into drawers.

All wardrobe frames come in a maple finish, which you can customise with doors and end panels in step 2.


Step 2 - Choose your wardrobe doors and end panels

Choose your finish from either the Roma, Classic or Shaker styles.

Doors and end panels

All doors are pre-drilled to fit handles. The small holes are pre-drilled from the inside, so you can choose which type of handles you want and where to place them. You will need to choose and order your handles separately (see step 4).

Please note that glass and mirrored doors only come in full height.

End panelsCombi doors

If you’re planning to use a combi converter in your wardrobe, then you’ll need combi doors instead of the full size ones. They are shorter and allow space for your drawers to open. They come in a choice of 7 colours, but aren’t available with glass or mirrored finishes.



End panels

To complete your wardrobe you must include 2 end panels (from a choice of 4 colours) to give extra stability.  It is not essential for Maple wardrobes as all wardrobe frames come in a maple finish however we do recommend it.

End panels

End panels

Step 3 – Choose your infill panels, cornice and plinths

Infill panels can be used to close up gaps around the wardrobe, usually along the top, and give a fully fitted look to your bedroom. Infill panels are supplied in 2.4 metre lengths. These are available in four colours.

Infill panels

For finishing touches we have a selection of cornices and plinths to choose from. All wardrobes require plinth and cornice. They’re both supplied in 3 metre lengths, which will need to be cut to size.

Plinths are only required to cover the front of wardrobes, and cornices to cover the front and sides of the unit.

Plinths and cornices

Step 4 – Choose your handles

To complete the design, choose your handles. All handles come with their own screws.

Wardrobe handles

We recommend using the following handle types with wardrobes :

Wardrobe handles

Step 5 – Choose your internal wardrobe accessories

Customise your wardrobes and get the most from your available space by choosing from our range of internal accessories.

Hanging rail and supports
Wardrobe handles
Wardrobe handles
Wardrobe handles
Hanging rail and supports
Available for single, double and corner wardrobes.
Internal pull out drawer and shoe rail
Includes two rails which can be used as shoe rail
Internal 3 drawer chest
Available for single and double wardrobes
Internal shelf
Available for single, double and corner wardrobes.
Wardrobe handles
Wardrobe handles
Wardrobe handles
Wardrobe handles
Tie rail
We suggest fitting to the carcass and not the door.
Internal drawer divider
Same product for single and double wardrobes.
External wall shelves
Available in oak or walnut, complete with metal brackets.
Trouser rail
Only available for double wardrobes.



  • Wardrobe frame
  • Doors and end panels
  • Infill panels, cornices and plinths
  • Handles
  • Internal wardrobe accessories
Bookmark this:
( is not responsible for the content of external websites. These links will open a new window.)