Triton Zante III 9.5kW Electric Shower833/0019

  • £114.99

Check stock

Tell us where you are to check stock:

About this product

This item is eligible for same day delivery and faster in‑store collection

The stylish Zante has got it all, with its push button start stop and seperate temperature controls. Matched with a sleek kit and easy clean rubber nozzle showerhead that prevents build up of limescale.

  • 9.5kW.
  • Push button stop/start.
  • Low pressure indicator.
  • Complete with wall brackets and fittings.
  • 5 shower spray modes.
  • 3 water connections.
  • Position of water connection: bottom.
  • 8 litres per minute.
  • 2 electrical entry points.
  • Position of electrical entry: top.
  • Adjustable riser rail included.
  • Hose length 1m.
  • Easy clean - rubber nozzles on the handset help prevent the build-up of limescale.
  • Manufacturer's 2 year guarantee.
  • EAN: 5012663015739.

62 reviews

Overall rating (4.5)

Ease of fitting
Ease of use
Performance
Design
BazaarVoice TrustMark
4 / 5
Ease of fitting
Ease of use
Performance
Design

Value for money

It's excellent for an upgrade! Value for money! Will recommend

Helpful?
5 / 5
Ease of fitting
Ease of use
Performance
Design

Courteous, Straight forward, super quick service.

Straight forward replacement, easy operation, very satisfied.

Helpful?
5 / 5
Ease of fitting
Ease of use
Performance
Design

The zante 3 replaced my old model the zante 2

The zante 3 replaced my old model the zante 2 both models are very similar so it was fairly easy to fit the only problem I come across was the casing which was a bit smaller meaning that new screw holes had to be drilled

Helpful?
Read more reviews

Questions & answers

13 questions | 14 answersAsk a question

what water pressure is required into the unit and what is the water pressure out of the unit

1 Answer

Hi, thank you for your question.

I have checked this for you and the shower unit does not determine the water pressure going in to and out of the shower and this is generated by the mains water supply. To guarantee activating the elements, the shower must be connected to a mains water supply with a minimum running pressure of 100kpa (1.0bar) at a minimum flow rate of nine litres per minute. The maximum static pressure must be no greater than 1000kpa (10 bar).

Thank you for using Q & A.

Helpful?

what size power cable is needed for this shower?

1 Answer

Hi, thank you for your question.

I have checked the manual and it states:

Twin and earth PVC insulated cable Current carrying capacity.

- Installed in an insulated wall 6 mm²35A10 mm²47A16 mm²63A.
- Clipped director buried in a non-insulated wall 6 mm²47A10 mm²64A16 mm²85A.
- In conduittrunking6 mm²38A10 mm²52A16 mm²69A.

Note: Cable selection is dependent on derating factors.

Thank you for using Question & Answer.

Helpful?

is the water feed going in on the left or the right side when looking at shower face on

1 Answer

Hi, thank you for your question.

I have looked into this and the water feed to the shower is at the top on the right and the water feed to the shower head comes out the bottom on the left-hand side.

Thank you for using Question & Answer.

Helpful?
Read more questions & answers

Boring but important info

*Prices correct as displayed but are subject to change.

Related Products
Whether you're out to add a cool feature ...
For a sense of sheer indulgence this product ...
Safe, intelligent and A rated for energy efficiency, ...